Magnetic touch latch with a plastic case polybagged with strike plates and screws. Each case is 5/8" tall and 1 13/16" deep (in closed position)
These U channel plates fit on glass up to 1/4" thick. Designed for magnetic latches. Has a self adhesive pad and is 1 9/16" wide and 1" tall
These strikes improve the strength and appearance of the catch. They are furnished with screws to match the plate
Used for higher security on drawers and doors. Flush type mounting on doors up to 1 3/8" thick. Supplied with two keys, trim washer, spur washer, mounting nut and two styles of cams.
For doors or drawers with either lipped or flush construction. Each lock is supplied with 2 keys, trim washer, spur washer for wood, and two different cams to accommo- date construction needs. Mounting holes are 3/4" in diameter. MASTER KEYING AVAIL- ABLE THROUGH SPECIAL ORDER
This lock is designed for drawers and doors with an easy to install screw in back to prevent slippage. It is surface mounted and requires a 3/4" diameter hole for the cylinder. Easy to install and won’t pull out of the wood
Designed for drawers, this half mortise type lock requires a mortise for the housing and a 7/8" diameter hole for the cylinder. Supplied with two keys, strike plate and screws. The key is removable in both the locked and unlocked position